Poster | Biophysical Society 2026 | San Francisco, CA
Daniela Vieira, Emad Shahnam, Jared Lapkovsky
Delong America, Montreal, QC, Canada
Presented at the Biophysical Society 70th Annual Meeting, this poster shows negatively stained proteins and virus-like particles imaged on the LVEM 25E at 25 kV, with morphology consistent with high-voltage TEM and markedly higher image contrast.
Electron microscopy is an indispensable tool for characterizing biological specimens, and its nanometer-scale view of structure makes it essential for studying proteins. Transmission electron microscopy (TEM) and cryo-TEM are the most widely used approaches.
High-voltage TEM (HV-TEM), operating at 80 kV or more, provides detailed images of proteins but suffers from low intrinsic image contrast and high operating cost and complexity. Cryo-TEM delivers the highest level of structural detail, yet instrument access is narrow and sample preparation and data acquisition are increasingly demanding.
Low-voltage electron microscopy (LVEM), operating below 25 kV, addresses these challenges. It allows evaluation of particle integrity, distribution and homogeneity comparable to HV-TEM data, and has proven useful as a screening step before cryo-TEM, so samples can be optimized quickly before freezing. All of this comes with simpler instruments, simpler sample preparation and easier operation.
Key findings
TEM images of a range of negatively stained proteins and virus-like particles (VLPs) were acquired with a low-voltage TEM operating at 25 kV (LVEM 25E, Delong Instruments). Samples were deposited on standard 3 mm TEM grids, and the resulting images were compared with HV-TEM data of the same specimens. VLP samples were provided by the New York Structural Biology Center (NYSBC).

Fig A. Virus-like particles, SERCA protein, a 700 kDa protein and proteasomes imaged on the LVEM 25E at 25 kV.

Fig B. The same virus-like particle sample imaged by LVEM (left) and HV-TEM (right).
LVEM images acquired with the LVEM 25E at 25 kV.
Across all samples, LVEM images showed sufficient resolution together with enhanced contrast, allowing clear identification and characterization of protein morphology and structure. Morphology was well preserved and delineation was consistent with that observed in HV-TEM images.
In the direct comparison, LVEM images showed clearly superior contrast to HV-TEM. This follows from the lower accelerating voltage, which increases electron scattering and consequently raises image contrast. The practical benefit is improved visualization and greater flexibility in staining procedures.
LVEM and HV-TEM share the goal of imaging nanostructures but differ sharply in cost and complexity. HV-TEM remains the right choice for atomic-level work such as metallurgy and crystallography, while the high contrast of LVEM makes it particularly well suited to biological and organic materials.
HV-TEM
Powerful but costly and centralized
LVEM 25E
Accessible protein imaging in your own lab


The LVEM 25E installed in the laboratory, highlighting its compact footprint and easy integration into standard lab environments.
Operating at 25 kV, LVEM offers an accessible and practical solution for biological research, providing data comparable to HV-TEM while improving image contrast by up to 20-fold. As an in-lab instrument it requires simpler facility infrastructure and carries lower maintenance and operating costs, and it has shown strong accessibility and effectiveness for negative-stain protein imaging.
Presented at
Biophysical Society 70th Annual Meeting
Booth 633 | February 21 to 25, 2026 | San Francisco, CA
Free PDF, sent straight to your inbox. Four quick details and it is on its way.
